8 Easy Steps to Touch Up Car Paint

It is almost inevitable to avoid the blotches and dents in a car. Sometimes, you don’t even know where the object comes from to bruise your car covering. Also, unfavorable climatic circumstances may cause some dents on the body of the car.

When this happens, you need to quickly touch up the car paint so that it can retain its glitter. You can carry out the car paint touch up with spray paintso no need to call the painter. This is a clear guideline on how to touch up car paint can help you make a lot different on the vehicle.

Steps on How to Touch Up Your Car Paint

Step 1: Ensure You Have the Right Hue of Paint for the Touch-Up

Ensure You Have the Right Hue of Paint for the Touch-Up

It would be best if you didn’t use a different paint for the touch up so that you don’t jeopardize the aesthetics of your car. Ensure you get the precise color, not any shade darker or lighter than the covering on the vehicle.

There are places where you could find these codes like the fireplace, the pigeon hole, under the shade of the passenger side. Most times, you will find the color code beside the Vehicle Identification Number (VIN) at the right underside of the windscreen.

If you can’t source it, then you have to go to the internet with the Car VIN, the model, make, and year it was manufactured. When you input these parameters, it displays the exact pigment of your car coating.

When you have ascertained the precise can’t color of your vehicle, take it with you to the car part shop.

The keeper in Car auto shop would get the paint for you. But ensure that the color codes match the one on the body of the paint to avoid getting a different color.

Step 2: Make the Touch-up Spot Ready

Make the Touch-up Spot Ready

Before the procedure of the touch up proper, you should have prepared the exact spot that needs the touch-up.

It would be best if you start by getting all sorts of dirt and grime out of your car. You can do this by washing the entire vehicle with water and mild car wash. Concentrate on the areas that need a touch-up, so you don’t mix the touch-up paint with the dirt.

After washing, use a soft fabric to dry off the whole car. Ensure that there is no wetness on the touch-up spot. Damp skins don’t accept car paint well, so you might have to clean it thoroughly to avoid such incidence.

Also, smooth the spot of any rusty dents with the aid of sandpaper. Scrape off any rust on the skin of the car spot so that the paint will not cover the rust and worsen the situation.

Furthermore, if you have waxed your car before, you need to take out the wax with lubricant and resin remover. This is to improve the ability of the paint to stay.

Paint is not adhesive to a waxed surface, so if you don’t remove the wax, the paint won’t stick nicely, and this could spoil the beauty of the touch-up job.

Scrape with sandpaper adequately to remove wax, rust, and spoilt paint from the spots. Then wash that part thoroughly and allow it to dry to make it free of dirt and rust. Now let’s see the best way to touch up car paint

Step 3: Get and Put On the Primer

Get and Put On the Primer

The primer provides a necessary covering for an iron surface to prevent the incidence of rust. It also prepares a favorable surface for the touch-up paint to stick well. However, the primer application will not be entirely essential when the blemish doesn’t get to the metal surface of the vehicle.

Once the scratch is just trivial, you can forget the priming and get to the next step. However, if you feel that it got to the iron place of the car, apply the primer.

Some people prefer to rub on the rust control substance before putting on the primer. This preventive measure helps to protect the surface from rusting.

You should do this after you must have scraped and washed the car. The rust control substance not only protects the particular spot on which you applied it, but it also spreads over to the entire surface and repels rusting. Make sure that the inhibitor is used before the primer and not after.

The best tool for a primer application is a tiny paintbrush that has a spiky keen head, although some people use a matchstick for precision. Place a drop of primer on the surface and allow it to diffuse to the whole spot, but be careful not to spill it over to the painted surface. Clean the spillover primer and allow it to dry before taking the next step.

Step 4: Damp Sanding

Damp Sanding

If you’re sure that the primer is dry, you can now damp sand the area to get it ready for the basal touch up paint. Ensure to restrict the sanding to the particular spot and not getting into the other painted surface of the car.

Spilling the sanding to the painted surface can spoil the glitter of your car and lead to additional work of trying to replace paint.

Use a tougher repellant glue to do your damp sanding stick. It’s not often necessary to swap the sandpaper when wet sanding.

Step 5: Piece Painting

Piece Painting

It’s advisable to do a trial painting in a concealable part of your car to ensure that it matches perfectly to the color of your vehicle. Even if the paint is the same color, do the trial painting to be sure it’s not corrosive to the original paint. The trial painting is an excellent way to touch up car paint chips.

Take a small portion and apply it in an area away from eye sights like the area near the wheels. If everything goes well, you can start an application on the affected parts.

Just like the priming, put a drop of paint and spread on the spot entirely. Do this to avoid spillovers that can spoil the glitter of your car.

You should apply like two or layers of paint to get the uniform color of the previous paint. You can do this intermittently on one layer after another until you finish the three. Then allow it to dry for about 24 hours to properly fix the car touch up paint

Step 6: Sand the Touched Up Spot to Smoothen

Sand the Touched Up Spot to Smoothen

You have to sand the touched up spot to smoothen it and making it uniform with existing layers. Take great care in this step so that you don’t mess up the whole thing.

Use 1000grit sandpaper and gently move it over the touched up the surface, then get a 2000grit sandpaper for a more elegant touch. Finish up with 3000grit sandpaper for a uniform paint surface.

Step 7: Put the Top Layer Paint and Re-Do the Sanding

Put the Top Layer Paint and Re-Do the Sanding

Apply the top covering on the while spot that you touched up, which is the area you sanded and the entire area around it. Put the coverings intermittently in their slim form and re-do sanding it. Do it like three times until it is even with the rest of the car paint.

Like in five to ten minutes intervals. Use fine surface sandpaper to abrade the surface until it glitters just like the entire car surface.

Step 8: Re-Wax and Buff the Whole Vehicle

Re-Wax and Buff the Whole Vehicle

A better way to restore your car to its dealership glittering after touch-up is to polish it. It is also vital that you re-wax the whole vehicle to preserve the paint and bring about a uniform coat for the entire vehicle.

Waxing and buffing up will combine efforts to bring the car back to its shiny status.

Wrap Up

Cars experience minor dents, scratches, and rusting frequently; this is why it’s essential to know how to touch up car paint on your ownIf you have gone through our guidelines, then you should be able to do right the paint touch up job with a spray or base paint.

Ensure that you

  • Sand the touched up part to smoothen and
  • Re-wax and buff up the car after a car paint touch up job

Do well to drop your comments if you have any in the comment section.