Do you want to maintain that sleek beautiful look that your car is known for? Then waxing your car is just what you need. Not only does it preserve the neat look, but waxing your car can also extend the durability of your vehicle.
It’s advisable that as a car you should know how to wax a car. The reason is that applying wax to your vehicle helps maintain your car’s appearance and gives it a good standing for reselling.
Also, waxing appears as a defensive covering against substances that are detrimental to the car paint like water and road lines.
Things Required for a Good Car Waxing
There are a few things to check when it comes to how to wax a car properly. One of the most important is the type of wax you intend to use on your vehicle and what it’s made off. The ones made from natural carnauba wax and artificial polymers or chemical wax.
Also, waxes can be classified based on viscosity. The pasty ones are durable but require additional work to apply while the liquid ones are easier on application but peel out easily. There are other things we need when waxing a new car apart from the wax.
- Mild car washing fluid
- Paste/ liquid wax
- Dirt remover
- Chamois (fiber cloth)
- Washing pail
- Power polished
- Lukewarm Water
Step by Step Guide on How to Was a Car
Step 1: Check the Surface for Spots When Washing It
Before a wax job, you need to wash your car entirely with lukewarm water and the mild carwash liquid. Using a piece of the chamois or any soft spongy material, scrub the painted surface of your vehicle to clean dirt. Ensure you use at least a pail of water to rinse the vehicle of all leather and then dry it with a neat microfiber material.
While washing, inspect the car for stuck bird dung, plant fluid, or street tar. If you see any, use the dirt remover to dissolve all stuck-on spots. When you’re through with this, you clean out the place with a cleaner-wet cloth to remove traces of the dents.
Step 2: Remove Scratches by Polishing
Before you wax your car, there are scratches which you intend on covering, do that with excellent polish. We don’t advise waxing before polishing unless you know how to wax your car with a polisher. Waxing before polishing means you need to wax again after polishing, and that a waste of limited wax.
Polishing is necessary as it helps you cover up unwanted dents in your car. Rewash the vehicle after you have finished polishing, then you can now wax.
Step 3: Rub on the Wax on the Car
The first thing you should do to wax a car is to smear it evenly on a palette surface for easy application. Whether you want to use paste wax or liquid wax, the procedures are the same. The only difference is that much effort is required when applying the paste wax because of its thickness.
To smear on a palette surface, put a little wax on a clean surface and smoother the wax on the palette. After this, apply evenly on the painted surface of your car and then swipe around with pure fabric for a neat job. Use this method for the paste and liquid waxes.
Step 4: Utilize the Power Polisher If You Wish
You can make use of a power polisher when applying liquid waxes on the car surface. However, it requires a level of expertise so that you don’t spoil the painted surface of the car. There is a high possibility of damage if you don’t use it properly.
Put a sponge cushion on the power polisher when applying the liquid wax on the painted surface. Set the power polisher on controlled speed and use it to smear the wax on the entire car surface.
Ensure that the sponge cushion is functioning while spreading the wax and grip the polisher well to enable proper contact with the car surface.
Step 5: Burnish the Wax and Allow to Completely Dry
Rub on the wax in a uniform pattern to ensure full coverage of the entire surface. After rubbing it in on the car, use the power polisher or a clean microfiber fabric to burnish the wax in round motions. Ensure you get the entire surface of the vehicle then allow it to dry.
If you apply the wax uniformly, it takes a faster time to dry. The liquid waxes might take around 60 seconds while the paste waxes dry up in 30 seconds. Take care not to smear waxes on screens or plastic parts of the car to avoid irremovable dent.
Step 6: Take out Excess Wax
The excess wax makes your work look untidy, so you should remove it. It’s best to allow the wax to dry so that it goes out like powder when rubbed. It can make a mess if it’s still pasty, so give it a little while to dry thoroughly. Remove the excess wax in these two steps.
- Clean out the excess wax with a microfiber fabric the same way you used to apply it. With the tip of your finger, gently scrub off the excesses like making circles with your finger.
- If you wish and you have the required level of expertise, you can make use of a power polisher to remove excess wax. Just affix the microfiber fabric and set to medium speed, then move the equipment in circles around the wax to eliminate all.
Step 7: Examine the Appearance of the Car
Check the car’s facade to ensure that the entire surface has a uniform application of the wax. Usually, you’ll discover some points where the wax didn’t reach, thus applying the wax properly in these areas is necessary. Then check for places with little paint dents, fix them, and do the waxing again until you’re satisfied.
How Often to Wax a Car
According to manuals that come with the wax containers, manufacturers advise that you can wax your car at least once annually. Some recommendations put it at two times per year, depending on the durability of the car waxes.
The effects of adverse weather conditions hinder some guarantees. These conditions damage the car wax and reduce its durability there increasing how often you wax a car.
Helpful Tips to Follow When Waxing a Car
- Ensure that after applying the wax that you wash off your car with a unique car wash fluid. You can also use the regular gentle dishwasher liquid, but more carefully, so you don’t spoil the waxing.
- Do you need that shine and sparkle after a wax? Then you may have to double-wax your car. You can commence with an artificial wax to polish well and then top it off with a coat of natural beeswax.
- Remove the smudge. If you notice smudging after cleaning out excess wax, you can use this helpful tip on how to get wax off a car. Get a can and fill with pure water. Then put a tablespoonful of isopropyl and shake well. Then spray on the spots and clean out with microfiber fabric.
Waxing your car would help you retain that shine that makes you want to show it off everywhere. However, when carry out the task on how to wax a car ensures you don’t spoil the paint surface. This guide puts you through the processes and tells you how long to wax a car, so it doesn’t develop smudging.
The processes are explained clearly in this guide but always keep in mind to:
- Use the appropriate materials when applying wax to your car
- Ensure you use the recommended type of wax for your car
- Make sure your hands are steady when using the power polisher.
Are any of the steps not clear enough? We can explain further in the comment section, ask.